This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field. Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device. Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field. Error % calculation for quicker pass/fail decision making in the field.
Best in class mA accuracy of 0.015 % for better measurement confidence and workload coverage. Min/Max/Hold to capture changing measurements.Switch test feature for quicker and more accurate pressure switch testing. New 1 and 300 PSI pressure ranges mean fewer extra tools required. 1, 30, 100 & 300 PSI ranges now available. 1 PSI to +1 PSI, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa). 0.0001 psi, 0.001 mbar, 0.0001 kPa. Zero, Min, Max, Hold, Damp. 12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa). 0.001 psi, 0.1 mbar, 0.01 kPa. 12 PSI to 100 PSI, (-850 mbar to 7 bar, -85 to 689.48 kPa).
0.01 psi, 0.1 mbar, 0.01 kPa. 12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa). 0.01 psi, 1 mbar, 0.1 kPa.
Fluke 718 series via using 700 Series Pressure Modules. 29 pressure modules, 0 1 in H20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs. To 0.025 % of full span, per pressure module specs.
Note: media compatibility per pressure module specs. Fluke 718 series via built in pump. 12 PSI or -850 mbar to full scale Supported Pressure Units; psi, in H20 (4 °C), in H20 (20 °C), cm H20 (4 °C), cm H20 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm. Note: Drive; 20 mA into 1000 for battery > 6.8V; 700 for battery 5.8 to 6.8 V.Range: 0 mA to 24 mA. Accuracy: 0.015 % + 1 count. 40 °C to 60 °C. 10 °C to 55° C. 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C). Random, 2 g, 5 Hz 500 Hz.
EN50082-1: 1992 and EN55022: 1994 Class B. 216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in). 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718. 4 to 20 hours typical, depending on functions used. Three years (one year on pressure pump in Fluke 718).LCD, 5 digit pressure and current simultaneous. For use with non-corrosive gasses. Protective Yellow Holster with test lead storage. Test Leads and Alligator Clip. Pressure Calibrator -12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa). NIST - Traceable calibration report and data. We are extremely busy, so we might not answer your emails. Items will be replaced or exchanged in case of DOA. All packages will go out after the weekend or after the holidays. The item "FLUKE 718-30G PORTABLE ELECTRIC PRESSURE CALIBRATOR W\ VACUUM PUMP NEW" is in sale since Friday, July 01, 2016. This item is in the category "Business & Industrial\Electrical & Test Equipment\Test, Measurement & Inspection\Testers & Calibrators\Calibrators\Pressure Calibrators". The seller is "computer_psycho" and is located in California.
This item can be shipped worldwide.